Honeywell Alarm System Low Battery Beeping?

What Is Honeywell Alarm System?

Before we get into the finer details of what causes the Honeywell alarm system low battery beeping, it is imperative that you know which company makes these alarm systems and so forth. As the name suggests, the Honeywell alarm system is made by Honeywell Home Security. It is interesting to note that Honeywell has its roots dating back to the late 1800s. Currently, it has a wide spectrum of branches all over the world.

Why Is My Honeywell Alarm System Beeping?

By installing Honeywell alarm systems in your home, be sure that you will be able to have some peace of mind as you will be able to keep an eye on your home 24/7. Besides this, the alarm can signal or alert you in case there are emergencies such as carbon monoxide leaks, fire, burglary and so forth.

1. Low or dead backup battery

Just like any other electric device, an alarm system also has a backup battery that helps to supply power in case there is a power outage in your home. Sometimes, this battery may get depleted, and as a result, you may hear, Honeywell alarm system low battery beeping. Better still, if the battery is dead and it requires a new one, you might hear this beeping every now and then.

  • Locate the alarm control panel: The control panel of your Honeywell alarm system is normally located in a closet, basement or utility room. Here, you should look out for a putty-colored rectangular box that bears the manufacturer’s name on it.
  • Open the control panel: Once you have located the control panel of your alarm system, time is ripe for you to open it. If you have a screwdriver, you will be good to go. Better still, if you have a security code or a key, be sure that you will have an easy time opening it. In case you do not have the key or know the code, it is essential that you seek the services of a professional.
  • Identify the battery: After opening the control panel, you will be able to see a black box that is connected to the circuit board. This is basically the battery of your alarm system. If you want to replace this battery, take note of its shape and other particulars so that you can purchase a replica of the same.
  • Disconnect the battery from the circuit board: Once the control panel is open, you will be able to see 2 wires that connect the battery to the circuit board. When removing the battery from the alarm system, start by removing the black wire gently. After that, remove the red wire from the positive terminal. As you do this, ensure that the terminals of your battery do not come into contact with metal objects.

2. Loss of power

The Honeywell alarm system needs power for it to operate optimally. Although the alarm system comes with a backup battery, it will always alert you whenever it is not getting sufficient amounts of power. Sometimes, the alarm keypads will display a ‘No AC’ or ‘AC loss’ signal in case there is no electric current getting to the alarm system.

3. Phone line connection

Apart from the reasons mentioned above, your alarm system can start beeping in case you usually have a monitored security system that uses landline monitoring. If there is a connection issue with the phone line, be sure that you will hear the beeping sound every now and then. You can confirm this by picking up the phone and see if the phone is working. If it works, then it might be something else.

4. Wiring problems

If your Honeywell alarm system has some wiring problems, chances are that it will start producing some beeping sounds. Typically, this can occur when a wire is corroded, broken or even cut.

5. Activated Chime mode

If you have already activated the Chime mode on your Honeywell alarm system, chances are that it will start beeping. Such usually happens when the alarm system is disarmed. In most cases, the Chime mode usually produces a 3-tone sound anytime the door or window is opened.

6. There exists a communication failure

When there is a communication failure or FC message on your monitored device, your alarm system will start beeping. Typically, this alerts you that there is a connection failure between the Honeywell alarm system in your home and the central station. Once you see this error, it is crucial that you fix it promptly.

Frequently Asked Questions (FAQ)

Will my house alarm go off it the battery dies?

Final Words

It is true to say that beeping sounds serve as a warning that something needs to be fixed immediately. Whether it is the battery backup or even connection failure, there are many factors that may contribute to this problem. With the assistance of a professional technician, such issues can be kept at bay. Take note of all the ideas we have mentioned above, and your home will be a safe haven for you, your valuables and loved ones.



Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
Start A Deals

Start A Deals


Hey, I am a niche blogger, affiliate marketer and online gamer. I love to drink coffee and write about my favorite things on this blog of mine.