How To Fix Vtech Baby Monitor Problems?

Vtech Baby Monitor Troubleshoot Issues

Like we have mentioned above, Vtech baby monitors can develop a number of diagnostic issues at one time or another. If you are a first-time owner, you may start panicking. However, these issues are perfectly normal. The good news is that we shall outline some of these issues and how you should solve them on the go.

1) Vtech baby monitor does not turn on

If your Vtech monitor does not turn on, chances are that it has drained its batteries and it needs new ones. To confirm whether the batteries have an issue, you can try to plug in the power cable to the parent unit and see if the device will turn on or not. In case your device turns on when it is has been plugged into the power cable, chances are that the batteries are dead and might need to be replaced promptly.

2) My Vtech baby monitor does not connect to Wi-Fi

Ideally, your Vtech baby monitor should connect to the Wi-Fi seamlessly. However, if it does not connect to the Wi-Fi as expected, you should remove the camera from the app and then reset the Wi-Fi modem.

3) My Vtech baby monitor is not working

Sometimes, your Vtech baby monitor may have issues turning on. If this happens, chances are that the power source or battery has issues. To solve these problems, you should connect the power adapter to the monitor and then allow it to charge. Thereafter, try to power it on.

4) The Vtech baby monitor keeps on beeping

If your Vtech baby monitor is beeping, it is a clear indication that it is on. Better still, it can start beeping to alert you that it needs to be charged and it is on and is not charging. Finally, it can start beeping if it is on and the Vtech baby monitor is not paired with the camera.

5) What causes interference with Vtech baby monitors?

First and foremost, the Vtech baby monitor normally relies on the 2.4GHz frequency signal band. In case the device is used alongside another device that uses the same frequency, chances are that interference will happen.

6) How can I reset my Vtech baby monitor parent unit?

If you want to reset the patent and baby unit, you should first disconnect the power to both the parent unit and baby unit. Once you are done, disconnect the battery in case you have installed one on the parent unit. After that, wait for about 10 to 15 seconds before you re-install the batter. Finally, connect the power to both the parent unit and the baby unit and then get started.

7) Why is my Vtech baby monitor losing signal?

Your Vtech baby monitor may start losing its signal due to interference from other devices in your home. From your microwave to your Wi-Fi router, there are many devices that can cause this problem. Therefore, it is imperative that you check the signal strength of the parent monitor whenever you find yourself in that situation. Better still, ensure that the parent unit and the baby unit are located in close proximity. By doing so, the signal strength will be stronger and better.

8) Do baby monitors affect Wi-Fi?

Well, it depends. Since most baby monitors operate at 900MHz, be sure that your Wi-Fi will not be interfered with. However, there are some models that operate at 2.4GHz.Such models can actually interfere with 802.11g routers. Single-band 802.11n routers may be affected as well. To avert such issues, you should consider getting a Wi-Fi friendly system.

9) Can my Vtech baby monitor be hacked?

Well, it depends on the model you have installed at home. However, those models that are internet-connected are very prone to such issues. Consequently, such models can allow hackers to access your child’s bedroom when you are away at work. Therefore, you should go for a model that has advanced security features.

10) Can I use my Vtech baby monitor without Wi-Fi?

Not really. Just like any other wireless device, the Vtech baby monitor needs internet for it to operate optimally. In this case, you should invest in a reliable Wi-Fi connection or any other internet broadband that will offer the much-needed internet in your home. By doing so, you will be able to get real-time updates about the wellbeing of your precious baby.

Final Words

Investing in a Vtech baby monitor is one of the best investment decisions that any parent can make. Besides allowing you to know what is happening to your baby even when you are away at work, it can allow your baby to sleep well interrupted at night. However, this device is not immune to diagnostic issues, such as the ones that we have mentioned above. By considering all the solutions that we have highlighted above, be sure that you will have some peace of mind, knowing that your baby is safe and your device is working optimally.

--

--

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
Start A Deals

Start A Deals

13 Followers

Hey, I am a niche blogger, affiliate marketer and online gamer. I love to drink coffee and write about my favorite things on this blog of mine.